Select Page

RAS Panel Bending Machines for Heating Systems

Panel Bending Covers for Pellet Heating Systems

Space is limited on the Hargassner shop floor which led to pallet oven specialists requesting a special solution with an intelligent loading and unloading robot for the production of their boiler trims. The RAS Multibend-Center panel bending machine was the perfect solution for them. The blanks are provided by a Stopa storage system and the robot can pick and load blanks from up to 4 different stacks of materials without being programmed. The unloading robot stacks the finished parts on pallets and automatically calculates its movements.

Panel Bending Wrapper for A Heating Stove

The UpDown RAS XLTbend folding machine is used for semi-automatic bending of wrapper for a heating stove made of 3 mm mild steel. The XLTbend’s hybrid gauging system automatically positions the parts for subsequent bends while the virtual navigator (ViN) indicates the exact blank loading position to the operator.

Panel Bending for Pellet Heating Systems

Arcobaleno in Italy uses the RAS Multibend-Center panel bending machine with a 2-station gantry loader to bend panels for pellet heating systems. However, this is just an example of the variety of products this Northern Italian job shop folds on the flexible metal bending system.

RAS Panel Bending Machine Used for Heat Pump Covers

The RAS Multibend-Center panel bending machine can create radii on heat pump covers from individual bending steps. Almost any radius with the highest quality standards can be bent with maximum part design flexibility and no additional investment in special tools.

  • MBC-ECO: Pelletofen schafft Wohlfühlklima
  • Nolting: Heizluftgebläse
  • RAS Multibend Center: Pelletheizungen
  • Multibend-Center: Radiusteil einer Wärmepumpe
  • Multibend-Center: Heizsysteme für Pellets
  • RAS XLTbend: Mantelblech für Ofen
Bending length max
2560 mm
Thickness max
2.0 mm (2.5 mm) / 14 ga (13 ga)
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
2160 mm
Thickness max
2.0 mm (2.5 mm)/14 ga (13 ga)
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
2560 mm
Thickness max
2.0 mm / 14 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
2160 mm
Thickness max
2.0 mm / 14 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
4060 mm
Thickness max
3.0 mm / 11 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
3200 mm
Thickness max
4.0 mm / 9 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
4060 mm
Thickness max
2.5 mm / 13 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
3200 mm
Thickness max
3.0 mm / 11 ga
Programming
automatic
Automation
high
Bending direction
up and down
Parts
Profiles and boxes
Bending length max
4060 mm
Thickness max
2.5 mm / 13 ga
Programming
mostly automatic
Automation
medium
Bending direction
up
Parts
Profiles and boxes
Bending length max
3200 mm
Thickness max
3.0 mm / 11 ga
Programming
mostly automatic
Automation
medium
Bending direction
up
Parts
Profiles and boxes
Bending length max
3200 mm
Thickness max
2.0 mm / 14 ga
Programming
automatic
Automation
medium
Bending direction
up
Parts
Profiles and boxes